Using Hibernate Mode - Dell B3460DN Mono Laser User Manual

Saving money and the environment
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Reports menu. The IP address appears as
four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > General Settings > Timeouts.
3
In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep mode.
4
Click Submit.
Using the printer control panel
1
From the printer control panel, navigate to:
> Settings > Settings >
2
Press the left or right arrow button to select the number of minutes you want the printer to wait before it enters
Sleep mode.
3
Press .

Using Hibernate Mode

Hibernate is an ultra‑low power operating mode. When operating in Hibernate mode, all other systems and devices
are powered down safely.
Note: The Hibernate and Sleep modes can be scheduled.
Using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Reports menu. The IP address appears as
four sets of numbers separated by periods, such as 123.123.123.123.
• If your are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > General Settings > Sleep Button Settings.
3
From the Press Sleep Button or Press and Hold Sleep Button drop‑down menu, select Hibernate.
4
Click Submit.
Using the printer control panel
1
From the printer control panel, navigate to:
> Settings > Settings >
2
Press Press Sleep Button or Press and Hold Sleep Button, and then press
3
Press Hibernate >
> General Settings >
> General Settings >
.
> Timeouts > > Sleep Mode >
.
89