Dell B3460DN Mono Laser User Manual page 76

Understanding the printer menus
Use
Print Area
Normal
Whole Page
Download Target
RAM
Flash
Resource Save
On
Off
To
Set the logical and physical printable area.
Notes:
•
Normal is the factory default setting. When attempting to
print data on the non‑printable area defined by the Normal
setting, the printer clips the image at the boundary.
• Whole Page allows the image to be moved into the
non‑printable area defined by the Normal setting. This
setting affects only pages printed using a PCL 5 interpreter
and has no effect on pages printed using the PCL XL or
PostScript interpreter.
Set the storage location for downloads.
Notes:
• RAM is the factory default setting. Storing downloads in the
RAM is temporary.
•
Storing downloads in a flash memory places them in
permanent storage. Downloads remain in the flash memory
even when the printer is turned off.
•
This menu item appears only when an optional flash memory
is installed.
Specify how the printer handles temporary downloads, such as
fonts and macros stored in the RAM, when the printer receives a
print job that requires more than the available memory.
Notes:
• Off is the factory default setting. Off sets the printer to retain
downloads only until memory is needed. Downloads are
deleted in order to process print jobs.
•
On sets the printer to retain downloads during language
changes and printer resets. If the printer runs out of
memory, then Memory Full [38] appears on the
printer display, but downloads are not deleted.
76