Finishing Menu - Dell B3460DN Mono Laser User Manual

Understanding the printer menus

Finishing menu

Use
Sides (Duplex)
1 sided
2 sided
Duplex Binding
Long Edge
Short Edge
Copies
1–999
Blank Pages
Do Not Print
Print
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Separator Sheets
Off
Between Copies
Between Jobs
Between Pages
Separator Source
Tray [x]
Multi‑Purpose Feeder
To
Specify whether two‑sided (duplex) printing is set as the default for all print jobs.
Notes:
•
"1 sided" is the factory default setting.
• You can set two‑sided printing from the software program.
For Windows users:
1
Click File > Print.
2
Click Properties, Preferences, Options, or Setup.
For Macintosh users:
1
Choose File > Print.
2
Adjust the settings from the print dialog and pop‑up menus.
Define the way two‑sided pages are bound and printed.
Notes:
• Long Edge is the factory default setting. Long Edge binds pages along their long
edge (left edge for portrait and top edge for landscape).
•
Short Edge binds pages along their short edge (top edge for portrait and left
edge for landscape).
Specify the default number of copies for each print job.
Note: 1 is the factory default setting.
Specify whether to insert blank pages in a print job.
Note: Do Not Print is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: "(1,2,3) (1,2,3)" is the factory default setting.
Specify whether to insert blank separator sheets.
Notes:
•
Off is the factory default setting.
• Between Copies inserts a blank sheet between each copy of a print job if
Collate is set to (1,1,1) (2,2,2). If Collate is set to (1,2,3) (1,2,3), then a blank
page is inserted between each set of printed pages, such as after all page 2's
and after all page 3's.
•
Between Jobs inserts a blank sheet between print jobs.
•
Between Pages inserts a blank sheet between each page of a print job. This
setting is useful when printing transparencies or when inserting blank pages in
a document.
Specify the paper source for separator sheets.
Note: Tray 1 (standard tray) is the factory default setting.
77