Clipped Pages Or Images - Dell B3460DN Mono Laser User Manual

Troubleshooting
Action
Step 1
a
Print a font sample list to check if the fonts you are using are supported
by the printer.
1
From the printer control panel, navigate to:
Menus > Reports > Print Fonts
2
Select PCL Fonts or PostScript Fonts.
b
Resend the print job.
Are you using fonts that are supported by the printer?
Step 2
Check if the fonts installed on the computer are supported by the printer.
Are the fonts installed on the computer supported by the printer?

Clipped pages or images

Leading edge
ABCDE
ABCDE
ABCDE
Trailing edge
Action
Step 1
a
Move the width and length guides in the tray to the correct positions
for the paper loaded.
b
Resend the print job.
Is the page or image clipped?
Step 2
From the printer control panel, set the paper size and type in the Paper
menu to match the paper loaded in the tray.
Do the paper size and type match the paper loaded in the tray?
Yes No
Go to step 2. Select a font that is
supported by the
printer.
The problem is solved. Contact
support.
Yes No
Go to step 2. The problem is solved.
Go to step 3. Do one or more of the
following:
139
technical
•
Specify the paper
size from the tray
settings to match
the paper loaded in
the tray.
•
Change the paper
loaded in the tray
to match the paper
size specified in the
tray settings.