Finishing Menu - Dell B3460dn User Manual

Understanding the printer menus
Use
Download Target
RAM
Flash
Resource Save
On
Off

Finishing menu

Use
Sides (Duplex)
1 sided
2 sided
Duplex Binding
Long Edge
Short Edge
Copies
1–999
To
Set the storage location for downloads.
Notes:
•
RAM is the factory default setting. Storing downloads in the
RAM is temporary.
• Storing downloads in a flash memory places them in
permanent storage. Downloads remain in the flash memory
even when the printer is turned off.
•
This menu item appears only when an optional flash memory
is installed.
Specify how the printer handles temporary downloads, such as
fonts and macros stored in the RAM, when the printer receives a
print job that requires more than the available memory.
Notes:
•
Off is the factory default setting. Off sets the printer to retain
downloads only until memory is needed. Downloads are
deleted in order to process print jobs.
•
On sets the printer to retain downloads during language
changes and printer resets. If the printer runs out of
memory, then Memory Full [38] appears on the
printer display, but downloads are not deleted.
To
Specify whether two‑sided (duplex) printing is set as the default for all print jobs.
Notes:
• "1 sided" is the factory default setting.
•
You can set two‑sided printing from the printer software.
For Windows users:
Click File > Print, and then click Properties, Preferences, Options, or Setup.
For Macintosh users:
Choose File > Print, and then adjust the settings from the Print dialog and pop‑up
menus.
Define binding for duplexed pages in relation to page orientation.
Notes:
•
Long Edge is the factory default setting. This assumes binding along the long
edge of the page (left edge for portrait and top edge for landscape).
•
Short Edge assumes binding along the short edge of the page (top edge for
portrait and left edge for landscape).
Specify the default number of copies for each print job.
Note: 1 is the factory default setting.
76