Random Spots/Blurred Images - Dell 1350cnw User Manual

Action
1
The print media surface may be uneven. Try
changing the Paper Type setting in the printer
driver. For example, change the plain paper to
thick.
On the Paper/Output tab in Printing
1
Preferences of the printer driver, change the
Paper Type setting.
Is the problem recovered?
2
Verify that the correct print media is being
used. See "Supported Paper Sizes" on page 162.
If not, use the print media recommended for
the printer.
Is the problem recovered?
3
Adjust the fuser temperature.
Launch the Tool Box, click Adjust Fuser on
1
the Printer Maintenance tab.
Adjust the fixing temperature by turning up
2
the value for your printing media.
Click Apply New Settings.
3
Click close box to exit Tool Box.
4
Is the problem recovered?

Random spots/Blurred images

292
Troubleshooting
Downloaded from ManualsPrinter.com Manuals
Yes No
The task is Go to action 2.
complete.
The task is Go to action 3.
complete.
The task is Contact Dell.
complete.