Using Batch Mode - Ricoh Aficio MP 8001 Quick Start Manual

Use [Batch] when the number of pages being fed in the document feeder exceeds the feeder capacity, or
you need to feed documents from the feeder and off the platen glass or you need to feed pages from
different sources but want to keep the page order and output multiple complete copies.
2. Select [Batch], and then press [OK].
3. Enter your job settings including the desired number of copies.
4. Place the first part of the originals in the feeder (or on the glass) press (Start) key
5. After those originals have been scanned, placed the next batch, pressing start each time a new page or pages
is added and continue until all the pages for your job is complete.
[#]
6. Press the key to release the complete job.
Note: If copies are not stapled, the machine will deliver the first copies as they are scanned and will release the additional copies
after the # key have been selected. You cannot switch between 1 sided and 2 sided documents when using this mode.

Using Batch Mode