Reception System Error Code - Konica Minolta bizhub C654 User Manual

8.3 G3 fax error code

Reception system error code

If the machine encounters a problem while receiving a G3 fax, an error dialog will appear and error codes will
be displayed in Rxx format. Take corrective actions by referring to the table below.
Code
R18
R21
R22
R32
R50
R60
R63
R69
R72
R78
R79
R93
R94
R95
R96
R97
R99
bizhub C754/C654
Corrective Actions
Check your machine. If toner or print paper is empty, supply them. If the memory is full,
empty the memory.
Turn the Closed Network RX function off, or inform the recipient of the correct password.
Turn the Closed Network RX function off, or inform the recipient of the correct password.
Change the setting for Auto Create User Box, or inform the recipient of the correct Confi-
dential User Box number.
Check the line status.
Check the line status.
Check the line status.
Check the line status.
Ask the sender to shorten the length of original to be sent before resending the fax.
Turn the Main Power Switch off and back on.
Turn the Main Power Switch off and back on.
• After checking with the sender, register a Confidential User Box for confidential recep-
tion.
• Check the password for the Confidential User Box.
• After checking with the recipient, register a Relay User Box for relay distribution.
• Check the password for the Relay User Box.
Check Forward TX Setting.
Inform the recipient of the correct number for the Confidential User Box.
Check PC-Fax RX Setting.
Turn the Main Power Switch off and back on.
8
8-5