Cannot Transmit Faxes - Konica Minolta bizhub C654 User Manual

Troubleshooting user guide
Hide thumbs Also See for bizhub C654:
Table of Contents

Advertisement

8.1

Cannot transmit faxes

8
Cannot Use the Fax Function
8.1
Cannot transmit faxes
Description of problem
Cannot send faxes.
bizhub C754/C654
Check points
Was the transmission procedure
carried out correctly?
Is the fax number you entered for
the destination correct?
Were the address book destina-
tion and program destination
registered correctly?
Is the telephone line setting cor-
rect?
Is the modular cable connected
correctly?
Is there a problem with the re-
ceiving machine?
If it is a password TX job, have
you sent the correct password?
Was the sender's fax number
correctly registered with "Check
Dest. & Send"?
Remedy
Check the transmission proce-
dure and then resend the fax.
If you are using a destination in
the Address Book or Program,
the fax number registered may
be incorrect.
Print the Speed Dial list to check
whether the numbers are regis-
tered correctly. For the proce-
dure for printing the list of
destinations, refer to page
page 7-8.
Does the setting in [Dialing Meth-
od] match the telephone line be-
ing used?
Check the setting and correct it if
an error is found.
For the dialing method setting,
refer to page 8-7.
Also, is the correct telephone line
specified in [Select Line]?
Check that the line registered in
the address book and the line set
at the time of fax transmission
are correct.
Is the modular cable connected?
Check the modular cable con-
nection and, if unplugged, plug it
in securely.
Also, is the line specified in [Se-
lect Line] correctly connected?
Check the connection of the line
you have specified.
Is the power of the receiving fac-
simile turned off, is it out of paper
or is there another problem?
Call the recipient to determine
whether there is a problem.
Check the recipient's password
then resend the fax using a cor-
rect password.
Check that the fax number regis-
tered with the recipient is cor-
rect.
Or set [Check Dest. & Send] to
[No], and then send a fax.
For details on the setting of
[Check Dest. & Send], refer to
page 8-8.
8
8-2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub c754

Table of Contents