Konica Minolta bizhub C654 User Manual page 72

10.2 Main messages and remedies
10.2 Main messages and remedies
Message
[Server connection error.]
[Cannot select address for TX.
Exceeded the maximum
number of addresses allowed
for broadcasting]
[The document could not be
saved in the User Box due to in-
sufficient HDD capacity. Check
log.]
[The number of registered boxes
has reached the maximum limit.
No additional boxes can be cre-
ated.]
[The number of documents in
the box has reached the maxi-
mum limit. No additional docu-
ments can be stored.]
[The number of pages registered
in a User Box has reached the
maximum number.]
[The number of programmed
jobs has reached the max. al-
lowance. Wait until a pro-
grammed job is completed.]
bizhub C754/C654
Cause
(1) The network cable is not con-
nected correctly.
(2) Under [Administrator Set-
tings], [Network Settings] are not
set correctly.
The number of destinations
specified exceeds the number
possible for a broadcast trans-
mission.
The hard disk is full.
The number of User Box that can
be registered has reached the
maximum number possible.
The number of documents that
can be saved in a User Box has
reached the maximum number
possible.
The registered document pages
have reached the maximum that
can be registered in one User
Box.
The number of jobs that can be
programmed has reached the
maximum number possible.
Remedy
(1) Make sure that the network
cable is correctly connected.
(2) Under [Administrator Set-
tings], check that [Network Set-
tings] are set correctly.
Reduce the number of broadcast
destinations, or send the trans-
mission in multiple batches.
Delete unnecessary data, then
try saving the data again.
Delete unnecessary User Boxes
then retry registration.
Delete unwanted documents
then retry registration.
Delete unwanted documents
then retry registration.
Wait until a job has been com-
pleted, or delete a current job.
10
10-3