Konica Minolta bizhub C654 User Manual page 40

6.1 Cannot print
Description of problem
Cannot specify the punch func-
tion.
Cannot punch.
The punch position is not as ex-
pected.
The overlay is not printed prop-
erly.
Paper is not fed from the speci-
fied paper tray.
bizhub C754/C654
Check points
The optional Finisher and Punch
Kit are required.
If the booklet, transparency or
envelope is specified, the punch
function is not available.
Is the paper that has been load-
ed into the paper tray in the cor-
rect orientation?
Is the stapling position or original
orientation appropriate?
Is there sufficient available com-
puter memory?
Does the specified paper tray
contain paper of the right
size/orientation?
Remedy
Install the required optional
product and enable them on the
printer driver.
Check the setting of each item of
the printer driver.
For information on paper types
supported by the punch func-
tion, refer to [User's Guide:
About This Machine].
Check the orientation of the pa-
per in the paper tray.
Check the punching position in
the printer driver settings.
For information on how to con-
figure the punch settings, refer to
[User's Guide: Print Operations].
For the original orientation set-
ting, refer to [User's Guide: Print
Operations].
Simplify the overlay to reduce the
data volume.
Load paper of the appropriate
size and orientation into the pa-
per tray.
6
6-6