Preparation For Ws Scan; Preparation Flow; Machine Side: Steps Required To Use This Function (For The Administrator); Checking A Lan Cable For Connection - Konica Minolta bizhub C654 User Manual

7.2

Preparation for WS scan

7.2 Preparation for WS scan
7.2.1

Preparation flow

1
Connecting this machine to the network

% Checking a LAN cable for connection

% Checking the network settings

Check that an IP address is assigned to this machine.
2
Prepare the environment required to use the WS scan transmission function
% Enabling the Web service function
Check the Web service settings and scanner name.
3
Prepare the environment required to use a computer
% Installing the scanner driver
Install a scanner driver used for Web service.
4
Configuring the machine to your environment
% Using SSL communication
If a communication that uses the Web service is encrypted with SSL in your environment, configure its
setting.
% Using a proxy server
When using a proxy server for a communication that uses the Web service, configure its setting.
5
Preparation finished
7.2.2

Machine side: Steps required to use this function (for the administrator)

Checking a LAN cable for connection
Check that a LAN cable is connected to the LAN port of this ma-
chine via the network.
Checking the network settings
Ensure that this machine has an IP address assigned to it. Tap [Utility] - [Device Information], and check that
an IP address is displayed.
d
Reference
If no IP address is displayed, you need to set up the network. For details, refer to [User's Guide: Web Man-
agement Tool].
bizhub C754/C654
7
7-3