[Restrict Operation]; [Reset Settings]; [Job Reset] - Konica Minolta bizhub C654 User Manual

[Restrict Operation]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Restrict User Access] - [Restrict Operation]
Specify items for which access is restricted.
Settings
[Restrict Broadcasting]

[Reset Settings]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Reset Settings]
Select whether to reset the functions and settings that are currently displayed when this machine has not
been operated for a certain period of time.
Settings
[System Auto Reset]
[Auto Reset]

[Job Reset]

[Job Reset]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Reset Settings] - [Job Reset]
Select whether to reset settings for the conditions that are applied when changing users or loading a docu-
ment into the ADF.
Settings
[When Account is changed]
[When original is set on
ADF]
[Next Job]
[Default Basic/Enlarge Dis-
play Common Setting]
bizhub C754/C654
Description
Select whether to prohibit the user from sending faxes to multiple destina-
tions. To prohibit broadcast, select [ON].
[OFF] is specified by default.
Description
Select whether to reset all settings (except registered settings) when this
machine has not been operated for a certain period of time.
Select whether to reset all settings (except registered settings) for each of
Copy, Fax/Scan, User Box functions when this machine has not been op-
erated for a certain period of time.
Select whether to reset settings for the conditions that are applied when
changing users or loading a document into the ADF.
Description
Select whether to initialize all settings (except registered settings) when the
key counter or management card is removed.
[Reset] is specified by default.
Select whether to reset all settings (except registered settings) when doc-
ument is loaded into the ADF.
[Do Not Reset] is specified by default.
Select whether to reset Staple Setting, Original Set/Bind Direction settings,
and TX Settings for each job.
• [Staple Setting]: Select whether or not to take over the settings upon
completion of a job for which Staple has been specified.
[OFF] is specified by default.
• [Original Set/Bind Direction]: Select whether or not to take over the set-
tings upon completion of a job for which Original Set and Bind Direction
have been specified.
[OFF] is specified by default.
• [Reset Data After Job]: Select whether to clear all settings or only des-
tinations when resetting for each job in Scan/Fax TX Settings. If you se-
lect [Confirm with User], a confirmation screen appears to check with
you if settings or destinations are to be cleared.
[Reset All] is specified by default.
Select whether to configure the initial values for Normal and Enlarge Dis-
play mode at the same time.
If [Apply to all] is selected, [Default Enlarge Display Settings] does not ap-
pear. Initial values for each mode that are changed in [Default Copy Set-
tings] or [Default Scan/Fax Settings] are applied to both Normal and
Enlarge Display modes.
[Do not Apply] is specified by default.
13
13-5