Konica Minolta bizhub C550 User Manual page 398

Appendix
Terms
Resolution
Scan Size
Scanning
Sending
Sharpness
Sub-scanning di-
rection
Super G3 (SG3)
Temporary original
saving
Timer TX
Transmission re-
serve
Sender name
Transmission
source record
Transmission time
V. 34
Z-Folded Original
C550
Description
Degree of details when scanning an original. The higher the resolution,
more detailed is the image and as such more time is required for trans-
mission (transmission time). Select the appropriate resolution.
A function for specifying the scanning size of an original and transmitting
it. When the paper width on the recipient's side is smaller than the paper
size of the original that is sent, normally the original is reduced and then
printed. When the original is not to be reduced, and the scan size is spec-
ified for the paper size on the recipient's side, the original of the original
size can be sent.
The operation of optically scanning the original and converting it to image
data.
Making a call. The fax machine sends an original and dials for polling.
This is a function to send an original by enhancing the edge of character.
Vertical direction for scanning originals.
G3 communication mode standardized by ITU-T V. 34. The communica-
tion can be carried out at a higher speed (high speed of 33,4000 bps) than
that of usual G3 communication.
This is a function for automatically saving the received original in the
memory when the machine cannot print the received original, such as
when the machine has run out of paper. When more paper is added, the
temporarily saved original is printed.
A function for sending a fax at a specified time. It is economical to com-
municate at discounted calling times, such as late at night or early in the
morning.
A function to reserve the next sending during transmission or while print-
ing.
The name of this machine is indicated in alphanumeric characters. Name
is printed as a part of the transmission source at the edge of the trans-
mitted original from the recipient's machine.
When a fax is sent, the transmission time, name, telephone number, page
number that is to be printed at the edge of the original is saved on the
recipient's machine.
The time required to send a fax. The higher the resolution or larger the pa-
per, more time is required for transmission.
A communication mode used for fax communication of Super G3. When
the recipient's machine or this machine is connected through a private
switchboard, communication with Super G3 mode may not be possible
depending on the setup of the telephone line. In such cases, fax can be
sent after setting the Super G3 mode to Off by selecting V. 34 OFF.
A function to scan and send the original when the original size is con-
firmed for originals whose original size cannot be correctly detected
since there are a number of folds. This function can be used only when
the original is scanned by ADF.
11
11-11