Preview - View Pages - Change Setting - Konica Minolta bizhub C451 User Manual

Scanning
Item
[View Finishing]
[Change Setting]
Note
By directly selecting a page, the image of the selected page is rotated by
180 degrees.

Preview - View Pages - Change Setting

The following settings specified before scanning the original can be
changed.
The new settings are applied to the originals scanned after the change of set-
ting.
Parameter
Basic - Document
Basic - Binding Position
Basic - Original Size
Application - Frame
Erase
Application - Center
Erase
C451
Description
The specified settings appear as icons and descriptions in the pre-
view image. To remove the icons and descriptions and display only
the image, touch [View Finishing] to deselect it.
Touch this button to change some of the settings specified before
the document is scanned. For details, refer to "Preview - View Pages
- Change Setting" on page 2-19.
Description
Select whether a single-sided or double-sided document is to be
scanned. If "Cover + 2-Sided" was selected, "Cover + 2-Sided" can
also be selected.
This item can be selected when the destination of "E-Mail", "User
Box", "FTP", "SMB" or "WebDAV" is specified and "Book Copy" is
not selected.
This item can be selected when "Mixed Original" is specified.
Specify the width of the area to be deleted from around the edge of
the document.
When [Center Erase] appears and is able to be selected, Center
Erase can be specified.
2
2-19