Konica Minolta bizhub C451 User Manual page 195
Network scanner operations
Hide thumbs
Also See for bizhub C451:
- User manual (808 pages) ,
- Copy operations (610 pages) ,
- Operation manual (304 pages)
Table of Contents
Advertisement
Specifying Utility mode parameters
11
Touch [↑] or [↓].
New screen 2/3 appears.
12
Touch [Host Address], and then type in the IP address or host name.
–
To enter a host name, touch [Host Name Input], and then type in the
host name, using the keyboard that appears.
–
To enter an IP address, touch [IPv4 Address Input] or [IPv6 Address
Input], and then type in the address, using the keypad or the
number buttons that appear. Touch [←] or [→] to move the cursor
to the desired position, and then type in the numbers.
–
When the input format is switched to entering an IP address after
the host name was entered, the host name is cleared.
–
If [Host Name Input] is touched after the IP address was entered,
the entered IP address is saved and the input screen appears.
–
When [Host Name Input] is touched, check that the DNS setting is
correctly specified. For details on the DNS settings, refer to "TCP/
IP Settings" on page 4-17.
13
Touch [OK].
14
Touch [File Path], and then type in the file path, using the keyboard that
appears.
15
Touch [OK].
C451
3
3-29
Advertisement
Table of Contents
Troubleshooting
