Using Novell Nds - Konica Minolta bizhub C451 User Manual

Network Settings

Using Novell NDS

Before performing the operation, make sure that the following information is
available. The settings can be specified with Novell NDS Netware Server ver-
sion 4.0 or later.
- Administrator password (required)
- Default NDS tree name (required)
- Default NDS context name (required)
- List of users for authentication (required)
!
Detail
Do not use """ or "+" in the external server password. For details on the
operating conditions of the external server, contact the network adminis-
trator.
If "Password Rules" is set to "Enable", only a password with 8 digits can
be specified. For details on the password rules, refer to the User's Guide
[Copy Operations].
NDS can be used only when IPX is used as the protocol. NDS cannot be
used when IP is used.
1
Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
"Displaying the Administrator Settings screen" on page 3-7.
2
Touch [Administrator Settings], then [User Authentication/Account
Track], then [External Server Settings], and then specify settings for the
following.
– Register an external server.
– Specify the server name.
– Select "NDS" as the server type.
C451
4
4-12