How To Operate The Audio Control; Switching Audio Control Modes - Eclipse CD3200 Owner's Manual

Various Settings

How to operate the AUDIO CONTROL

Switching audio control modes

Various Settings
Various audio control modes may be fine-tuned using this procedure.
Press the [ENTER] button for less than one second to select the item to be
1
adjusted.
Modes will switch in the order shown below each time the button is pressed.
BASS → MID → TREB → BALANCE → FADER → NON-F
→ VOL → BASS
*1: NON-F (non-fader) Output is not affected by the settings of the BASS, MID and
TREB.
*2: Setting cannot be made in FM mode.
Mode
BASS Adjusts bass level.
MID
Adjusts middle level.
(MIDDLE)
TREB
Adjusts treble level.
(TREBLE)
SVC
Adjusts different volume levels for each audio
(Source Volume
mode.
Control)
Adjusts the audio balance of the front and rear
FADER
speakers
Adjusts the audio balance of the right and left
BALANCE
speakers
NON-F
(NON-FADER
Adjusts non-fader level (for subwoofer).
LEVEL)
The loudness control may be turned on to
emphasize low and high frequencies at low
LOUDNESS
volume levels.
Loudness boosts bass and treble at low volumes.
64
Function
*1
→ LOUDNESS → SVC
Rotary Mode
Left
Decrease level. Increase level.
Decrease level. Increase level.
Decrease level. Increase level.
Decrease level. Increase level.
Emphasizes rear Emphasizes front
speakers. speakers.
Emphasizes the left Emphasizes the
speakers. right speakers.
Decrease the sub- Increase the sub-
woofer level. woofer level.
Select OFF Select ON
*2
Right