How To Operate The Audio Control; Switching Audio Control Modes - Eclipse CD7100 Owner's Manual

How to operate the AUDIO CONTROL

Switching audio control modes

Various audio control modes may be fine-tuned using this procedure.
Press the [ENTER] button for less than one second to select the item to be
1
adjusted.
Modes will switch in the order shown below each time the button is pressed.
3-Way Speaker Layout:
BASS → MID → TREB → LOUDNESS*
4 Speaker + Sub-Woofer Layout:
1
→ NON-F*
BAL/FAD*
*1: Cannot be set when the CSII is set to ON.
*2: Setting cannot be made in FM mode.
*3: NON-F (non-fader) Output is not affected by the settings of the BASS, MID and
TREB.
ATTENTION
See page 61 for more information on Speaker Layout settings.
WARNING
Do not adjust the volume or other controls while driving the vehicle. Do so only while parked in a
safe location.
Mode
BASS Adjusts bass level.
MID
Adjusts middle level.
(MIDDLE)
TREB
Adjusts treble level.
(TREBLE)
Adjusts different volume levels for
each audio mode. When SVC is set,
SVC the volume level can change as
shown in the example setting (See
next page).
BAL/FAD
Adjust left/right (BALANCE) and
(FADER/
front/rear (FADER) speaker balance.
BALANCE)
3
→ LOUDNESS*
Function
Emphasizes
low sounds.
Emphasizes
medium
sounds.
Emphasizes
high sounds.
Increase the
SVC setting
level.
Emphasizes
front
speakers.

How to operate the AUDIO CONTROL

1 2
→ SVC* → BASS
1 2
→ SVC* → BAL/FAD
Button operation (Press [SELECT] button)
Upper Lower
Softens low
sounds.
Softens
medium
sounds.
Softens high
sounds.
Decrease the
SVC setting
level.
Emphasizes
rear
speakers.
Right Left
- -
- -
- -
- -
Emphasizes
Emphasizes
right
left speakers.
speakers.
IX
X
47