Delete A Registered Cell Phone; Connecting A Registered Cell Phone - Eclipse CD3200 Owner's Manual

Operation
Press the [SELECT] (Up/Down)
3
button to select Device Search.
Press the [ENTER] button.
4
"Searching" will be displayed.
ATTENTION
"FAILED" will be displayed if cell phone cannot
be registered. Repeat Search procedure.
Press the [SELECT] (Up/Down)
5
button to select the device name of
the cell phone you want to register.
ATTENTION
Each time the [SCREEN/TEXT] button is
pressed, the display changes in the following
way, and you can register the cell phone using
the device address (BD ADD) as well.
Device name ↔ Device address (BD ADD)
If the device name cannot be obtained during
the search, "UNKNOWN" is displayed.
Press the [ENTER] button.
6
"Waiting" will be displayed.
Use the cell phone to input the
7
passcode.
The default passcode is 1234.
When the registration has been
8
completed, "COMPLETED" will be
displayed.
The cell phone is now registered.
( and appear on the display.)
"FAILED" will
registration is not successful. Repeat
Search procedure.
54
be displayed if

Delete a registered cell phone

Press the [SELECT] (Up/Down)
button while in the Phone Setting
1
selection mode to select Select
Phone.
Press the [ENTER] button.
2
Press the [SELECT] (Up/Down)
3
button to select cell phone to be
deleted.
Press the [ENTER] button.
4
Press the [SELECT] (Up/Down)
5
button to select Delete.
Press the [ENTER] button.
6
The "Delete ?" message appears on
the display to confirm the cancellation.
Press the [ENTER] button.
7
"COMPLETED" will be displayed
8
when deletion is successful.
ATTENTION
When a cell phone is deleted, all data
associated will also be deleted (including
history, preset dial, and phonebook) from the
main unit.

Connecting a registered cell phone

Press the [SELECT] (Up/Down)
button while in the Phone Setting
1
selection mode to select Select
Phone.
Press the [ENTER] button.
2