Emerson Network Router User Manual page 37

Using ProLink II Software
To enable inventory reset:
1. Choose
View > Preferences
2. Select
Enable Inventory Totals Reset
3. Click
Apply
To manage totalizers and inventories:
1. Choose
ProLink > Totalizer Control
measurement application is enabled in the transmitter). See Figure 3-5.
2. Use the buttons in this window to start, stop, or reset the totalizers and/or inventories.
Note: The Start , Stop
volume totalizer, and all API-related totalizers.
3. The
Reset Inventories
(see above). Use this button to reset all inventories, including API-related inventories.
Note: ProLink II does not support separate resetting of the API volume totalizer and API volume
inventory. To reset these, you must reset all totalizers or all inventories.
Figure 3-5 Totalizer Control window
Installation and Use Manual
.
(if necessary).
or
, and Reset buttons displayed under All Totals affect the mass totalizer, the
button under All Totals is displayed only if this function is enabled
.
ProLink > CM Totalizer Control
(if the concentration
31