Emerson Network Router User Manual page 10

Before You Begin
Figure 1-1 Transmitter model numbers and codes
RFT9739
R F T 9 7 3 9 x x x x x x x
Series 3000
3 x x 0 x x x x x x x x x x x x
Model 1500/2500
x 5 0 0 x x x x x x x x x x x x
Model 1700/2700
x 7 0 0 x x x x x x x x x x
4
Mounting:
• R = rack-mount or panel-mount
• D, E = field-mount
Transmitter model
Sensor interface:
• 0 = none (MVD)
• 5, 6 = 4-wire (MVD)
Mounting:
• R = rack-mount
• P = panel-mount
• A = field-mount
Transmitter model
Software option 1:
• B = Filling and Dosing application
Outputs option board:
• A = analog outputs option board
• B, C = configurable input/outputs option board
Mounting/installation type:
• D = 4-wire to sensor with integral core processor
• B = remote core processor with remote transmitter
Transmitter model
(1) Model 1500 transmitter with filling and dosing application only.
Requires Outputs option board C.
Outputs option board:
• A = analog outputs option board
• B, C = configurable input/outputs option board
• D = intrinsically safe outputs option board
• E = F fieldbus outputs option board
OUNDATION
• G = PROFIBUS PA outputs option board
Mounting/installation type:
• R = remote (4-wire remote installation)
• I = integral (transmitter mounted on sensor)
• C = transmitter/core processor assembly (9-wire remote installation)
• B = remote core processor with remote transmitter
Transmitter model
RFT9712
R F T 9 7 1 2 x x x x x x x
IFT9701/9703
I F T 9 7 0 x x x x x x x x
(1)
®
ProLink II Software for Micro Motion
Transmitter model
Mounting:
• I, M = integral
• R, L, J, S, A = remote
Transmitter model
®
Transmitters