Other messages
MECHA INITIALIZE REQUEST
MECHA INITIALIZE
PRINT STOP
*Note : 3
This is an operation for initialization. Make sure to press the MONITOR button first. If the MEMORY
button is pressed first, a new image will be stored in memory erasing any previously stored image.
1 Overcoming paper jams
1 Press the OPEN button to pull out the printing unit.
2 Remove the ink cassette.
3 Turn the knob on the right side of the printing unit clockwise.
, Roll up the print paper completely.
4 Remove the print paper.
5 Cut the defective part of print paper with scissors.
6 Cut both edges of the print paper.
7 Install the print paper. ( Refer to pages 7 - 8.)
Indicated when the power is turned on after turning off during printing.
Press the MEMORY button for more than one second while pressing
the MONITOR button. *Note : 3
Indicated during initializing.
In the case of pressing the STOP button on the remote control during
printing, this unit is initialized. This message is indicated during initializing.
9. Troubleshooting
85