Table of Contents
Advertisement
7. Setting the functions (Memory SW menu)
H -START (H - Position )
Function
SPCL TIMING ( Special Timing )
Function
MONITOR ADJ ( Monitor Adjust )
Function
Item
R-SUB
B-SUB
4 PRINT SET
PRN DIR ( Print Direction )
Function
PRN SPEED ( Print Speed )
Function
62
Adjust the H-position timing for the special signal .
NML (Normal) .......... Inputting PAL signal
FRONT .................... Inputting the special signal
When the image is imbalanced and cannot be corrected by H-POSI on basic printing, set to "FRONT".
When setting to "FRONT", the printing image may distorted in the special playback of VCR because
"AFC" ("MAIN MENU"
"2. SIGNAL SET" ) is invalid.
Enlarge the setting area of H-POSI (MAIN MENU
ON ............... Enlarge the setting area
OFF ............. Initial setting
When inputting the signal except PAL , the image cannot be moved to desired position in H-POSI of
initial setting.
If this function is set to "ON", the image can move to right and left direction beyond the initial setting.
When setting to "ON", the next image may not be stored in the memory during printing.
Adjusting the color of image on the monitor.
( This adjustment is invalid on printing.)
MON R-SUB ........... Adjusting the red-sub contrast
MON B-SUB ........... Adjusting the blue-sub contrast
Adjustment
Red-subcontrast
Blue-subcontrast
Print setting 2
Selecting the print direction.
NML ............. The margin is made on the lower position.
REV ............. The margin is made on the upper position.
NML
This function is available on S-size paper. But printing is invalid on 2 multi-image, PHOTO 3 x 4, CARD .
Selecting the print speed.
NML ( Normal ) ...... Normal speed
FAST ........................ High speed
When setting to "FAST", the color of printing image may be light.
Also, the image cannot be stored during printing.
SIGNAL SET , USER SIZE ADJ ).
-32
Adjusting area
add cyan .................................................... add red
add yellow .................................................. add blue
REV
+31
Advertisement
Table of Contents
