Table of Contents
Advertisement
1 OPERATION
1 Setting the multi-print and photo-print menus
Setting multi-print and photo-print functions
1 Press the MENU button. Then, press the UP
2 Press the RIGHT
shift button to select "3. ADDITIONAL".
3 Press the DOWN
shift button to select "MULTI : OFF/ON". Then press the RIGHT
, "MODE : SAME/DIFF/PHOTO" is displayed on the menu screen.
, "IMAGES : 2 / 2s/ 4/ 16" is displayed on the lower line.
4 Set the multi-image type (2, 2s, 4 or 16) or photo print size.
, Set "MODE : SAME/DIFF/PHOTO" and "IMAGES : 2/2s/4/16 or CARD/3*4/5*5" menus.
, Refer to 1 MULTI PRINT and 2 PHOTO PRINT for the multi-image type.
1 Setting the SEPARATE function
5 Press the DOWN
shift button to select "SEPARATE : OFF/ON" .
6 Press the RIGHT
shift button to select "ON".
1 Displaying the source image (image from the input signal)
SET
7 Press the SET
button.
, "CHANGE : OK/CANCEL" is selected.
, When changing the setting, select "CANCEL".
SET
8 Press the SET
button.
, The MAIN MENU is displayed.
SET
9 Press the SET
button.
, "SAVE PRG 1/2/3" is selected.
, This menu is used to store the setting in any one of 3 programs (1, 2 or 3).
A Press the RIGHT
or LEFT
, The setting will be overlaid. In case of keeping the stored program, do not select the program No. in which the setting is
stored.
8. Printing Procedures (Special prints)
or DOWN
shift button to select the program number 1, 2 or 3 to store the setting.
shift button to select "3. ADDITIONAL PUSH [
shift button to select "ON" .
]".
75
Advertisement
Table of Contents
