Mitsubishi CP700E Operation Manual page 10

1 Print paper and ink sheet
} } } }
Attention}
, The following types of paper sheet sets are available.
Use our original consumable. We can not guarantee the failure of using others.
Ink sheet
Product name
PK700S
PK700L
Print-paper
Product name
CK700
K65H
K65HM
Print-paper/ Ink sheet
Product name
CK700S4P
CK700L4P
CK700SC
CK700LC
CK710SPC
CK710LPC
Ink sheet /Ink cassette
Product name
PKC700S
PKC700L
Note:
, Please observe the following precautions.
Precautions before printing
0 Fingerprints or dust on the paper's printing surface may degrade print quality and cause paper jams. Immediately after the
paper is replaced, 2-3 images may be printed with a blank part due to hand's dust or oil.
0 When print paper is rapidly transferred from a cool place to a hot place, vapor or dew is generated on the paper's surface
causing paper jams or degraded print quality. Leave the print paper in the room to stabilize its temperature before using it.
0 When print paper and ink sheet runs out during printing, the printing operation stops and the error message "PAPER
EMPTY" or "SHEET EMPTY" is displayed. Replace the print paper and ink sheet with a new one.
0 If paper feeding is repeated while installing the print paper, the indicated number of prints may not be done.
After printing
0 When the printed paper is touched by a wet hand, the print may be discolored.
0 If the paper absorbs non-volatile organic solvents ( alcohol, ester, ketone etc.) the print may be discolored.
0 Discoloration of prints will be accelerated if the print paper comes into contact with soft vinyl chloride such as transparent
tape etc.
Storage
0 Store the prints in a place with low humidity free from direct sunlight.
0 Leaving the print paper in contact with PVC-based materials causes color of print paper to come off and to be stained.
0 Avoid direct sunlight and placing the printed paper near a heater.
Note:
0 If the print paper is installed for two or more days, the prints may be rolled after printing. There is no cause for alarm
because the print paper is rolled on the inside of the printing unit.
3. Preparations before operation
Ink sheet size Number of prints
S size 200 sheets
L size 130 sheets
Print size Number of prints
S / L size S size:200 sheets
L size:130 sheets
S / L size S size:200 sheets
L size:125 sheets
S / L size S size:200 sheets
L size:125 sheets
Print size Number of prints
S size 110 sheets
L size 75 sheets
S size 200 sheets
L size 130 sheets
S size 200 sheets
L size 130 sheets
Print size Number of prints
S size 200 sheets
L size 130 sheets
Usage
For 3 color use
For 3 color use
Usage
For 3 color use
For thermal printing
For thermal printing
Usage
For 3 color use (Surface-coated paper)
For 3 color use (Surface-coated paper)
For 3 color use (sticker)
For 3 color use (sticker)
For 3 color use (16-division pre-cut sticker)
For 3 color use (16-division pre-cut sticker)
Usage
For 3 color use
For 3 color use
9