Maintaining Interactive Display Ventilation; Maintaining The Pencil - Smart Technologies SMART Board SBID Interactive Display 6052i Installation And User Manual

Table of Contents

Advertisement

To clean the LCD screen
To replace the battery
44 |
CH A P T E R 6 – M AIN T AIN IN G YOU R IN TE RAC T IVE DI SPL AY
Do not use a cleaning solution or glass cleaner, as they can deteriorate or
discolor the screen.
Avoid touching the silver reflective tape on the border between the screen and
the bezel and ensure it stays dry. Damage to this strip affects touch
interactivity.
1. Shut off the computer, and then disconnect the power sources.
2. Wipe the LCD screen with a lint-free, non-abrasive cloth.

Maintaining Interactive Display Ventilation

Your interactive display requires ventilation to allow the fans to cool the interactive
display.
CAUTIONS
Avoid setting up or using your interactive display in an area with excessive
levels of dust, humidity or smoke.
Wipe and clean accessible ventilation holes monthly.
Remove the interactive display from the wall annually to clean the ventilation
holes in the back of the interactive display. See Removing Your Interactive
Display on page 46

Maintaining the Pencil

For trouble shooting steps, see Troubleshooting Pencil Issues on page 41
Replacing the Pencil Battery
Replace the pencil's AAA battery when the Low Battery warning appears on your
screen or when your pencil no longer draws digital ink.
CAUTION
Rechargeable batteries are not recommended.
See Installing a Battery in the Pencil on page 15.

Advertisement

Table of Contents
loading

Table of Contents