Adjusting Audio Volume - Smart Technologies SMART Board SBID Interactive Display 6052i Installation And User Manual

To change a video source
To display
monitor information
To adjust the volume
using the control panel
To adjust the volume
using the remote control
26 | CH A P T E R 4 – U S IN G T H E I NT E R A C TI V E D IS P LA Y
Selecting a Video Source
You can change the video source of the LCD monitor.
Press the INPUT button on the LCD monitor's control panel until the LCD monitor
displays the video source you want.
OR
Press the INPUT button on the remote control until the LCD monitor displays the video
source you want.
NOTE
Your interactive display includes a VGA cable to connect your computer to your
interactive display. You can use other connection types.
Displaying LCD Monitor Information
You can view on-screen information about the LCD monitor, such as the monitor's
current input source or current aspect ratio.
Press the DISPLAY button on the remote control.

Adjusting Audio Volume

You can change the volume of connected speakers (the interactive display doesn't
have internal speakers) using the control panel or the remote control.
1. If the on-screen menu is currently displayed, press the Menu button to close the
on-screen menu.
2. Press the + or - button to increase or decrease the volume.
Press the VOL + or - button to increase or decrease the volume.