Connection To The Network; System Requirements; Required Equipment Preparation; Hardware And Software Requirement For Computer - Hitachi CP-X2011N Operating Manual

1. Connection to the network

1. Connection to the network

1.1 System requirements

1.1.1 Required equipment preparation

The following equipments are required to connect the projector to your computer
through the network.
Projector
LAN cable (to connect the projector to a network): CAT-5 or greater
Computer (minimum 1 set): equipped with the network feature

1.1.2 Hardware and software requirement for computer

The "LiveViewer" software needs to be installed on all the computers to connect
to the projector through a network. To use the "LiveViewer" your computer needs
to meet the following requirements.
OS: One of the following.
Windows XP Home Edition /Professional Edition (32 bit version only)
®
Windows Vista
®
bit version only)
CPU: Pentium 4 (2.8 GHz or higher)
Graphic card: 16 bit, XGA or higher
* When using the "LiveViewer" it is recommended that the display resolution of
your computer is set to 1024 x 768.
Memory: 512 MB or higher
Hard disk space: 30 MB or higher
Web browser: Internet Explorer
CD-ROM drive
• The network communication control is disabled while the projector is
NOTE
in standby mode if the STANDBY MODE item is set to SAVING. Please connect
the network communication to the projector after setting the STANDBY MODE
to NORMAL. (
• You can get the latest version of the "LiveViewer" and the latest information
for this product from our website. (
4
(100Base-TX or 10Base-T)
Home Basic /Home Premium /Business /Ultimate /Enterprise (32
SETUP menu in the User's Manual – Operating Guide)
®
6.0 or higher
7)