Registering My Connection - Hitachi CP-X2011N Operating Manual

1.9 Prole data (continued)

1.9.4 Registering My Connection

One of the prole data, which is often used, can be registered as the My
Connection prole data. Once the data is registered, all you need to do is to select
the My Connection to connect to the network. (
1) Click the [My Connection].
2) The "Add My Connection" screen will come
up.
The currently selected prole data for the My
Connection is shown with a check mark in
the list.
3) Select one of the prole data listed in the
window and put a mark in the check box.
The data selected before is turned
unmarked.
4) Click the [OK], then the window is closed.
If you don't want to select a new one, click
the [Cancel].
• If you don't want to use the My Connection, mark no data listed in the
NOTE
window, and click the [OK].
• In the list, all prole data are shown no matter which network adapter is
selected. You can register a prole data that is not for currently selected
network adapter as the My Connection prole data.
1. Connection to the network
12)
35