Hitachi CP-X2011N Operating Manual page 131

1. Connection to the network
1.5 Selecting the network connection method (continued)
Wired LAN
1) Enter the following information for the
projector.
Subnet mask *1: 255.255.255.128
2) Click the [Connect].
3) The network connection will be established.
Proceed to item 1.8 Conrming the
connection to your destination. (
*1 If you use a Subnet mask other than Class A, B or C, this screen appears.
• If you require the network setting information on the projector, take
NOTE
the following procedure to nd it out.
1) Turn on the projector, and make sure that the projector image is on screen.
2) Press the MENU button on the remote control or the ▲/▼/◄/► buttons on
the projector to show the menu on screen.
3) Use the ▲/▼ cursor buttons to select the Go to Advanced Menu..., and use
the ► cursor button to enter the item.
4) Use the ▲/▼ cursor buttons to select the NETWORK, and use the ► cursor
button to enter the item.
5) Use the ▲/▼ cursor buttons to select the INFORMATION, and push the ►
cursor button.
6) The setting will be displayed in the NETWORK_INFORMATION-box.
22
(example)
30)