Hitachi CP-X2011N Operating Manual page 101

Troubleshooting
Related messages (continued)
Message
92
The internal temperature is rising.
Please turn the power off, and allow the projector to cool
down at least 20 minutes. After having conrmed the
following items, please turn the power ON again.
• Is there blockage of the air passage aperture?
• Is the air lter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the remedy, please
set FAN SPEED of the SERVICE item in the OPTION menu
to HIGH.
A note of precaution when cleaning the air lter.
Please immediately turn the power off, and clean or change
the air lter referring to the "Cleaning and replacing the
air lter" section of this manual. After you have cleaned or
changed the air lter, please be sure to reset the lter timer
52,87).
(
Description