1.9 Profile data
1.9.1 Outline of Profile data
The network setting to connect the projector and computer can be stored as a
prole data. Once the data is stored, all you need to do is to select the data to
connect to the network. It is recommended when the same network connection is
often used.
1.9.2 Making Profile data
The prole data is made on the Manual
Conguration screen. (
Up to 10 prole data can be stored for each
network adapter.
1) Select the [Prole] and click the [New].
2) The "Create new prole" will come up.
If you have already made 10 prole data,
you cannot make a new one, until you delete
a stored data.
Input all information required for your
network connection.
If you want to clear the information you input,
click the [Clear].
3) Click the [OK], after all information is set.
If you don't want to store it, click the [Cancel].
4) The new prole data is shown in the prole list, if you click the [OK].
• When you make a new prole data, it is strongly recommended to
NOTE
check that the new dada can work properly by selecting the data at the Prole
connection. (
• If you change a wireless network adapter on your computer, make a new
prole data for the adapter.
23)
23)
1. Connection to the network
33