Table of Contents
Advertisement
2. Connection to the network
2. Connection to the network
The connection method of wireless LAN and wired LAN is as follows.
Wireless LAN (USB-WL-5G) (optional)
Item
Standard
Channel
*1
Encryption
*2
Bandwidth
*1: Available channels may vary according to area.
*2: WEP is only for INFRASTRUCTURE mode.
Wired LAN
Item
Standard
Port
NOTE
• The network function is not available when STANDBY MODE is set
to NETWORK(WOL) or SAVING and the projector is in standby mode. Connect
the projector to the network after setting STANDBY MODE to QUICK START or
NORMAL. (&SETUP menu in the Operating Guide)
• Depending on the type of wireless network device and computer you are
using, the projector may not be able to communicate properly with your
computer, even if the computer is equipped with a built-in wireless LAN
function. To eliminate communication problems, use a Wi-Fi
network device.
• Connect the optional wireless adapter (USB-WL-5G) to the WIRELESS port
of the projector when using the wireless LAN. (&30 in the Operating Guide)
• You cannot connect this product directly to communication lines (including
public wireless LAN) of telecommunications carriers such as mobile
telecommunications companies, fixed-line telecommunications companies, and
internet service providers.
When you connect this product to the internet, be sure to connect it via a router
and so on.
IEEE802.11a/b/g/n/ac
2.4 GHz : 1~11ch
5 GHz : 36/40/44/48ch (W52)
149/153/157/161/165ch (W58)
WPA2-PSK(AES/TKIP), WPA-PSK(AES/TKIP),
WEP(64/128bit)
2.4 GHz : 20/40MHz
5 GHz : 20/40/80MHz
100BASE-TX / 10BASE-T
RJ-45
12
Description
Description
certified wireless
®
QM00973-1
Advertisement
Table of Contents
