Hitachi CP-X2011N Operating Manual page 145

1. Connection to the network
1.9 Prole data (continued)
Also, you can register a prole data to My
Connection, when the network connection
is established. When it is established, the
"Connection to Projector successful" screen is
30)
displayed. (
If you wish to use the current connection
setting for My Connection, check in the box for
the [Register this setting to My Connection].
And then, if it is okay to overwrite the present
data for My Connection, click the [OK].
A new prole data will be created and it is
registered as My Connection prole data.
• If there are already 10 prole data, the check box cannot be checked.
NOTE
Please erase one of the existing prole data.
• The prole name for the stored data is assigned by the "LiveViewer"
automatically. The name will be shown at the right side of the check box.
36