Mazda 8T12-EA-03K User Manual page 53

Mazda6_8T12-EA-03K_Edition1 Page53
Friday, December 5 2003 8:54 AM
qLATCH Child-Restraint System
Installation Procedure (Rear
Outboard Seats)
1. Make sure the seatback is securely
latched by pushing it back until it is
fully locked.
2. Expand the area between the seat
bottom and the seatback slightly to
verify the locations of the LATCH
lower anchors.
Marking
LATCH
lower anchor
For rear
right seat
NOTE
The markings above the LATCH lower
anchors indicate the locations of
LATCH lower anchors for the
attachment of a child-restraint system.
3. Secure the child-restraint system using
BOTH LATCH lower anchors,
following the child-restraint system
manufacturer's instruction.
Form No.8T12-EA-03K
4. If your child-restraint system came
equipped with a tether, that probably
means it is very important to properly
secure the tether for child safety, please
carefully follow the child-restraint
system manufacturer's instructions
when installing tethers.
Sedan Anchor
bracket location
For rear right seat
For rear
left seat
Sedan
Tether strap
position
Hatchback/Wagon
Anchor bracket
location
For rear left seat
Black plate (53,1)
Essential Safety Equipment
Child Restraint
For rear left seat
For rear center seat
Open
Cover
Tether strap
Anchor
bracket
For rear right seat
2-39