Mazda6_8T12-EA-03K_Edition1 Page277
Friday, December 5 2003 8:59 AM
2. Detach the electrical connector from
the socket.
3. Turn the socket and bulb assembly
counterclockwise and remove it.
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse order
of removal.
(Hatchback)
1. Remove the cover.
2. Turn the socket and bulb assembly
counterclockwise and remove it.
3. Disconnect the bulb from the socket.
Socket
4. Install the new bulb in the reverse order
of removal.
Form No.8T12-EA-03K
(Wagon)
1. Remove the liftgate upper trim and
high-mount brake light component.
Socket
2. Turn the socket and bulb assembly
counterclockwise and remove it.
3. Disconnect the bulb from the socket.
4. Install the new bulb in the reverse order
of removal.
License plate lights
1. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the lens and
remove the lens by carefully prying on
the edge of the lens.
Black plate (277,1)
Maintenance and Care
Owner Maintenance
Liftgate upper trim
Socket
8-35