Mazda 8T12-EA-03K User Manual page 211

Mazda6_8T12-EA-03K_Edition1 Page211
Friday, December 5 2003 8:57 AM
qClock
When the ignition switch is in the ACC or
ON position, the time is displayed.
Time setting
1. Press the CLOCK button until a beep
sounds, and "12Hr" and "24Hr" will be
displayed.
2. Press the SET button to switch between
"12Hr" and "24Hr" displays. The
selected display will flash.
To select the desired clock setting,
press the CLOCK button again while
the preferred setting is flashing.
3. "Hr. ADJUST" will be displayed next,
and the hour portion of the display will
flash. Press the SET button to set the
hour, then press the CLOCK button.
4. "Min. ADJUST" will be displayed
next, and the minutes portion of the
display will flash. Press the SET button
to set the minutes, then press the
CLOCK button.
Time resetting
While the clock is displayed, press the
SET button 1.5 seconds or more. When
the button is released, a beep will sound
and the clock will be reset as follows:
(Example)
Form No.8T12-EA-03K
Black plate (211,1)
Interior Equipment
12:01—12:29→12:00
12:30—12:59→1:00
NOTE
When the SET button is released, the
seconds are reset to "00".
qAmbient Temperature Display
When the ignition switch is in the ON
position, press the AMB button to display
the ambient temperature.
NOTE
The displayed ambient temperature
l
may vary from the actual ambient
temperature depending on the
surrounding area and vehicle
conditions.
Press the AMB button 2 seconds or
l
more to switch the display from
Fahrenheit to Centigrade or vice
versa.
(With fully automatic climate
l
control system)
Press the AMB button again to
switch the display from ambient
temperature to the temperature set
for the air conditioner.
Interior Comfort
6-47