Mazda 8T12-EA-03K User Manual page 151

Mazda6_8T12-EA-03K_Edition1 Page151
Friday, December 5 2003 8:56 AM
qShift Position Indicator Light
(Automatic Transaxle)
This indicates the selected shift position
when the ignition switch is in the ON
position.
Gear position indicator
Gear position indicator
When the shift lever is in the D or M
position, the numeral for the selected gear
illuminates.
Form No.8T12-EA-03K
Warning/Indicator Lights and Beep Sounds
qTCS Indicator Light
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position. If the TCS is
operating, the indicator light flashes.
If the light stays on, the TCS may have a
malfunction and it may not operate
correctly. Take your vehicle to an
Authorized Mazda Dealer.
NOTE
In addition to the indicator light
l
flashing, a slight lugging sound will
come from the engine. This indicates
that the TCS is operating properly.
On slippery surfaces, such as fresh
l
snow, it will be impossible to
achieve high rpm when the TCS is
on.
qTCS OFF Indicator Light
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position.
It also comes on when the TCS OFF
switch is pressed and TCS is switched off.
Black plate (151,1)
Driving Your Mazda
í
í
í
5-35
Some models.