Mazda 8T12-EA-03K User Manual page 20

Mazda6_8T12-EA-03K_Edition1 Page20
Friday, December 5 2003 8:53 AM
Essential Safety Equipment
Seats
CAUTION
The seat-bottom power adjustment is
l
operated by motors. Avoid extended
operation because excessive use can
damage the motors.
To prevent the battery from running
l
down, avoid using the power
adjustment when the engine is
stopped. The adjuster uses a large
amount of electric power.
Don't use the switch to make more
l
than one adjustment at a time.
qSeat Slide (Driver's Seat)
To slide the seat, move the slide lifter
switch on the outside of the seat to the
front or back and hold it. Release the
switch at the desired position.
Slide lifter switch
2-6
Form No.8T12-EA-03K
Black plate (20,1)
qSeat Recline (Driver's Seat)
WARNING
Reclining:
Sitting in a reclined position while the
vehicle is moving is dangerous
because you don't get the full
protection from seat belts. During
sudden braking or a collision, you can
slide under the lap belt and suffer
serious internal injuries. For
maximum protection, sit well back and
upright.
Change the seatback angle by pressing the
front or rear side of the reclining switch.
Release the switch at the desired position.
Reclining switch