Mazda 8T12-EA-03K User Manual page 178

Mazda6_8T12-EA-03K_Edition1 Page178
Friday, December 5 2003 8:56 AM
Interior Comfort
Climate Control System
To turn off the system, press the OFF
switch.
NOTE
For an optimal cabin temperature, set
l
the temperature close to 25.0°C
(77.0°F). Adjust to the desired
temperature if necessary.
Setting the temperature to maximum
l
high or low will not provide the
desired temperature at a faster rate.
To prevent cool air blowing from the
l
vents when heating right after
starting the engine, the amount of
airflow is reduced until the air warms
up.
qWindshield Defrosting and
Defogging
Press the windshield defroster switch.
In this position, the position is
automatically selected, and the air
conditioner automatically turned on
(however, the indicator light does not
illuminate). The air conditioner will direct
dehumidified air to the front windshield
and side windows (page 6-4). Airflow
amount will be increased.
6-14
Form No.8T12-EA-03K
Black plate (178,1)
WARNING
Foggy Windshield:
Using the position with the
temperature control set to the cold
position will cause the outside of the
windshield to fog up. Your vision will
be hampered, which could lead to a
serious accident. Set the temperature
control to hot or warm position when
using the position.
NOTE
Use the temperature control dial to
increase the air flow temperature and
defog the windshield more quickly.
qSunlight/Temperature Sensor
The fully automatic air conditioner
function measures inside and outside
temperatures, and sunlight. It then sets
temperatures inside the passenger
compartment accordingly. Don't obstruct
the sensor.
Sunlight sensor