Mazda 8T12-EA-03K User Manual page 164

Mazda6_8T12-EA-03K_Edition1 Page164
Friday, December 5 2003 8:56 AM
Driving Your Mazda
Switches and Controls
qReprogramming the HomeLink
system
To program a device to HomeLink using a
HomeLink button previously trained,
follow these steps:
1. Press and hold the desired HomeLink
button. DO NOT release the button.
2. The indicator light will begin to flash
after 20 seconds. Without releasing the
HomeLink button, proceed with
"Programming" - step 2.
qErasing Programmed HomeLink
Buttons
To erase the existing programming from
all three operating channels, press and
hold the two outside buttons (
on the auto-dimming mirror until the
HomeLink indicator light begins to flash
after approximately 20 seconds.
Verify that the programming has been
erased when you resell the vehicle.
5-48
Form No.8T12-EA-03K
, )
Black plate (164,1)