Mazda6_8T12-EA-03K_Edition1 Page266
Friday, December 5 2003 8:59 AM
Maintenance and Care
Owner Maintenance
2. Hold the end of the blade rubber and
pull until the tabs are free of the metal
support.
Metal support
Tab
Pull out
3. Remove the metal stiffeners from the
blade rubber and install them in new
blades.
Stiffeners
CAUTION
Don't bend or discard the stiffeners.
You need to use them again.
8-24
Form No.8T12-EA-03K
Black plate (266,1)
4. Carefully insert the new blade rubber.
Then install the blade assembly in the
reverse order of removal.
(Wagon)
1. Raise the wiper arm and rotate the
wiper blade to the right until it unlocks,
then remove the blade.
CAUTION
To prevent damage to the rear window,
don't let the wiper arm fall on it.