Mazda 8T12-EA-03K User Manual page 275

Mazda6_8T12-EA-03K_Edition1 Page275
Friday, December 5 2003 8:59 AM
3. Disconnect the bulb from the socket.
Brake lights/Taillights, Rear turn signal
lights
(Sedan)
1. Pull the center section of the plastic
retainer and remove the retainers and
partially open the trunk side trim.
Trunk side trim
Removal
Installation
2. Turn the socket and bulb assembly
counterclockwise and remove it.
Form No.8T12-EA-03K
3. Disconnect the bulb from the socket.
Socket
4. Install the new bulb in the reverse order
of removal.
NOTE
To replace the bulb, contact an
Authorized Mazda Dealer.
(Hatchback)
Due to the complexity and difficulty of
the procedure, the bulbs should be
replaced by an Authorized Mazda Dealer.
(Wagon)
1. Turn the knob and remove the cover.
Left side
2. Turn the socket and bulb assembly
counterclockwise and remove it.
Black plate (275,1)
Maintenance and Care
Owner Maintenance
Rear turn signal lights
Brake lights/Taillights
Socket
Right side
8-33