Mazda 8T12-EA-03K User Manual page 276

Mazda6_8T12-EA-03K_Edition1 Page276
Friday, December 5 2003 8:59 AM
Maintenance and Care
Owner Maintenance
3. Disconnect the bulb from the socket.
Rear turn signal lights
Brake lights/Taillights
Socket
4. Install the new bulb in the reverse order
of removal.
NOTE
To replace the bulb, contact an
Authorized Mazda Dealer.
Reverse lights, Taillights
(Sedan)
1. Pull the center section of the plastic
retainer and remove the retainers, then
remove the trunk rear trim.
Removal
Installation
Trunk rear trim
2. Turn the socket and bulb assembly
counterclockwise and remove it.
8-34
Form No.8T12-EA-03K
Black plate (276,1)
3. Disconnect the bulb from the socket.
Reverse lights
Taillights
Socket
4. Install the new bulb in the reverse order
of removal.
(Hatchback/Wagon)
1. Remove the cover.
2. Turn the socket and bulb assembly
counterclockwise and remove it.
3. Disconnect the bulb from the socket.
Reverse lights
Taillights
Socket
4. Install the new bulb in the reverse order
of removal.
High-mount brake light
(Sedan)
1. Remove the high-mount brake light
component.