Mazda 8T12-EA-03K User Manual page 281

Mazda6_8T12-EA-03K_Edition1 Page281
Friday, December 5 2003 8:59 AM
3. Pull the fuse straight out with the fuse
puller provided on the fuse block
located in the engine compartment.
Engine compartment fuse box
4. Inspect it and replace if it's blown.
Normal
5. Push in a new fuse of the same
amperage rating, and make sure it fits
tightly. If it doesn't, have an Authorized
Mazda Dealer install it.
If you have no spare fuses, borrow one
of the same rating from a circuit not
essential to vehicle operation, such as
the SPARE circuit.
CAUTION
Always replace a fuse with one of the
same rating. Otherwise you may
damage the electric system.
Form No.8T12-EA-03K
Replacing the fuses under the hood
If the headlights or other electrical
components don't work and the fuses in
the cabin are OK, inspect the fuse block
Fuse puller
under the hood. If a fuse is blown, it must
be replaced. Follow these steps:
1. Turn off the ignition switch and all
other switches.
2. Remove the fuse block cover.
Tab
3. If a fuse is blown, replace it with a new
one of the same amperage rating.
Blown
NOTE
To replace the MAIN fuse, contact an
Authorized Mazda Dealer (page 8-40).
Black plate (281,1)
Maintenance and Care
Owner Maintenance
Fuse block cover
Normal
Blown
8-39