Upper Paper Guide Removal; Rear Paper Guide Removal; Pf Roller Unit Removal - Epson Stylus C82 Service Manual

EPSON Stylus C82

4.2.3.13 Upper Paper Guide Removal

1. Remove Front Paper Guide and PE Sensor Holder. (See Section 4.2.3.12 and
4.2.3.3)
2. Release 2 hooks holding each Extension Spring 4.07, then remove Extension
Spring 4.07 (4 springs).
3. Follow order shown below to remove Upper Paper Guide from Printer
Mechanism.
Extension Spring 4.07
Upper Paper Guide
Hooks
Figure 4-47. Upper Paper Guide Removal

4.2.3.14 Rear Paper Guide Removal

1. Remove Upper Paper Guide and C486 PSB/PSE Board. (See Section 4.2.3.13 and
4.2.2.2)
2. Release Rear Paper Guide from right side hook, then shift Rear Paper Guide in
direction of arrow A.
3. Release 2 hooks fastening Rear Paper Guide to PF Roller Unit, then remove Rear
Paper Guide by pushing it in direction of arrow B.
DISASSEMBLY AND ASSEMBLY
1
Hooks
2
<Rear Side>
Rear Paper Guide
Hook
Figure 4-48. Rear Paper Guide Removal
When installing Rear Paper Guide, if hooks are not completely
fastened, the ASF Unit cannot be properly set.

4.2.3.15 PF Roller Unit Removal

1. Remove Rear Paper Guide. (See Section 4.2.3.14)
2. Use tweezers to remove leg of Compression Spring 4.89 from Printer Mechanism.
3. Use tweezers to release left and right Bushing 8 fastening PF Roller Unit to Printer
Mechanism, then allow the PF Roller Unit to rotate in directions shown by arrows
A and B.
4. Follow the order shown below to remove PF Roller Unit from Printer Mechanism.
A
Compression Spring 4.89
Figure 4-49. PF Roller Unit Removal
Disassembly
B
A
PF Roller Unit Hook
Bush 8
3
2
4
PF Roller Unit
Revision A
Hook
1
B
Bush 8
42