C314Main Board; C314Main Board Removal - Epson AcuLaser Color 2000 Service Manual

EPSON AcuLaser C2000

4.2.4 C314MAIN Board

4.2.4.1 C314MAIN Board Removal

1. Remove the Rear Controller Cover (See 4.2.3.6 "Rear Controller Cover
Removal"on page 126.)
2. Remove 7 screws securing the C314MAIN Board to the Controller Box
.
Interface Cover
Figure 4-14. C314MAIN Board Removal
Disassembly and Assembly
3. Remove a screw(A) securing the C314MAIN Board and an earth wire
of the Controll Panel harness.
Remove the harness from the connector of the MAIN Board.
(B)
(B)
(B) (B)
(
Figure 4-15. Screws of the C314MAIN Board (1)
4. Remove 6 screws(B) securing the Controller Box to the C314MAIN
Board.
5. Pull out the C314MAIN Board with the Interface Cover.
Disassembling Procedure
Revision C
Controll Panel Harness
(B)
(A)
Guide Rail
(B)
(B)
129