Button Functions - Epson AcuLaser Color 2000 Service Manual

EPSON AcuLaser C2000
OneTouch Mode 2 LED (F)
On: OneTouch mode 2 is enabled. The following 4 items can
be set in this mode:
"RITech", "Copies", "Mp Tray Size", "Toner Save Mode"
SelecType Mode (G)
On: SelecType mode is enabled.
All LEDs
All LEDs come on when a service-call error has occurred.

1.4.2 Button Functions

On Line button (H)
When the printer is on-line, pressing this button puts the printer in off-line
to prevent printing. Pressed during panel setting mode, it immediately
terminates the setting mode and brings the printer back to on-line status.
Form Feed button (I)
If the Form Feed lamp is lit in off-line status, pressing this button causes
the printer to print a page of data. If data for multiple pages has been
received, it is printed. If the Form Feed LED is lit because the control
codes are not terminated, data received up to that point is printed. The
printer does not eject paper when the Form Feed LED is on.
Continue button (J)
While the Continue LED is on, pressing this button clears the error. Also, a
warning message indicated during on-line status can be cleared by
pressing this button.
Product Descriptions
SelecType button (K) (or Shift button)
Used to select OneTouch mode 1 / OneTouch mode 2 / SelecType mode,
as follows:
The first push of the button puts the printer in OneTouch mode 1.
Pressing this button in the OneTouch mode 1 puts the printer in
OneTouch mode 2.
Pressing this button in the OneTouch mode 2 activates the SelecType
mode to enter the initial level of SelecType mode. (The "Test Menu"
appears.)
Menu button (L)
Pressing this button activates the SelecType mode. The initial level of
the mode ("Test Menu") appears. In the SelecType mode, this button
is used to select the setting menu, the primary level of the mode.
In OneTouch mode 1, used to select the value for "Paper Source".
In OneTouch mode 2, used to select the item for "RITech".
In SelecType mode, used to select the setting menu.
NOTE: If this button is pressed with the Shift button held down,
setting values and items scroll backward.
Item button (M)
Pressing this button brings up the item that was last selected.
In OneTouch mode 1, this button is used to select the value for "Paper
Size".
In OneTouch mode 2, this button is used to select the value for
"Copies".
In SelecType mode, this button is used to select the setting item.
NOTE: If this button is pressed with the Shift button held down,
setting values and items scroll backward.
Control Panel
Revision C
38