Tray Menu; Config Menu - Epson AcuLaser Color 2000 Service Manual

EPSON AcuLaser C2000

1.4.5.2 Tray Menu

MP Type, LC1 Type, LC2 Type
This specifies the type of paper set in the MP tray, LC1/2 Cassette.
Setting Value Setting Contents
Plain Plain Paper (copy paper etc.)
Letterhead Letterhead
Recycled Recycled paper
Color Color paper
Trnsprncy OHP transparency
Labels Label paper
<When the setting of Paper Type is envelopes (IB5, C10, C5, DL, MON, C6)>
The paper feeder used is always the MP tray. Engine control is
performed as envelops.
<When Page Size=A5, B5, HLT, GLT, GLG, EXE, F4, CTM>
The paper feeder used is always the MP tray. Paper Type setting is
prioritized in selecting engine control mode. MP Type setting is used
when Paper Type=Normal.
<If Page Size=A4, LT>
When Paper Type = Normal
If Paper Source = Auto,
From the paper feeders where the paper type specified by a
language and available tray in the table above matches, the paper
feeder which also matches the specified paper size is selected.
If Paper Source = MP, LC1 or LC2, specified paper feeder is
selected
When Paper Type = Thick, Transprnc
The paper feeder used is always the MP tray
Product Descriptions
Engine Control Available Tray
Plain paper MP, LC1&2
Plain paper MP
Plain paper MP, LC1&2
Plain paper MP, LC1&2
OHP (half speed) MP
Label paper (half MP
speed)
Control Panel
Engine control
Paper Type setting always takes priority.
When Paper Type=Normal, engine control is performed based on
the specified value for the selected tray.
NOTE: The type of paper specified when selecting a paper feeder is
specified only by a command in ESC/Page or ESC/Page-Color
or LJ4.
NOTE: "Bond" is not used to avoid the confusion with "Thick".

1.4.5.3 Config Menu

RITech
See the description in the RITech item in the 97SIS-565 Basic Page-Printer
Operating Specifications. This is an outline correction function which is
equivalent to that in a single color page printer in B/W printing. In color
printing, When in the AcuLaser Color Halftoning mode, outline correction
is accomplished by the CRIT function.
Toner Save
See the description in the Toner Save item in the 97SIS-565 Basic Page-
Printer Operating Specifications. During color printing, by controlling the
half-tone growth and by printing with a low density, toner consumption is
reduced.
Paper Type
This sets the printing speed and CM to match the type of paper used.
Normal (Copy paper, recycled paper, J paper, etc.)
Revision C
48